Merge pull request #382 from stefanzweifel/dependabot/github_actions/stefanzweifel/git-auto-commit-action-6

Bumps [stefanzweifel/git-auto-commit-action](https://github.com/stefanzweifel/git-auto-commit-action) from 5 to 6.
- [Release notes](https://github.com/stefanzweifel/git-auto-commit-action/releases)
- [Changelog](https://github.com/stefanzweifel/git-auto-commit-action/blob/master/CHANGELOG.md)
- [Commits](https://github.com/stefanzweifel/git-auto-commit-action/compare/v5...v6)

---
updated-dependencies:
- dependency-name: stefanzweifel/git-auto-commit-action
  dependency-version: '6'
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>

.github/workflows/update-changelog.yaml

@@ -27,7 +27,7 @@ jobs:
           latest-version: ${{ github.event.release.name }}
 
       - name: Commit updated CHANGELOG
-        uses: stefanzweifel/git-auto-commit-action@v5
+        uses: stefanzweifel/git-auto-commit-action@v6
         with:
           branch: master
           commit_message: Update CHANGELOG

CHANGELOG.md

@@ -5,10 +5,16 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
 and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html).
 
-## [Unreleased](https://github.com/stefanzweifel/git-auto-commit-action/compare/v6.0.0...HEAD)
+## [Unreleased](https://github.com/stefanzweifel/git-auto-commit-action/compare/v6.0.1...HEAD)
 
 > TBD
 
+## [v6.0.1](https://github.com/stefanzweifel/git-auto-commit-action/compare/v6.0.0...v6.0.1) - 2025-06-11
+
+### Fixed
+
+- Disable Check if Repo is in Detached State ([#379](https://github.com/stefanzweifel/git-auto-commit-action/pull/379)) [@stefanzweifel](https://github.com/@stefanzweifel)
+
 ## [v6.0.0](https://github.com/stefanzweifel/git-auto-commit-action/compare/v5.2.0...v6.0.0) - 2025-06-10
 
 ### Added

README.md

@@ -19,7 +19,7 @@ Adding git-auto-commit to your Workflow only takes a couple lines of code.
 2. Add the following step at the end of your job, after other steps that might add or change files.
 
 ```yaml
-- uses: stefanzweifel/git-auto-commit-action@v5
+- uses: stefanzweifel/git-auto-commit-action@v6
 ```
 
 Your Workflow should look similar to this example.
@@ -47,7 +47,7 @@ jobs:
       # …
 
       # Commit all changed files back to the repository
-      - uses: stefanzweifel/git-auto-commit-action@v5
+      - uses: stefanzweifel/git-auto-commit-action@v6
 ```
 
 > [!NOTE]
@@ -56,7 +56,7 @@ jobs:
 The following is an extended example with all available options.
 
 ```yaml
-- uses: stefanzweifel/git-auto-commit-action@v5
+- uses: stefanzweifel/git-auto-commit-action@v6
   with:
     # Optional. Commit message for the created commit.
     # Defaults to "Apply automatic changes"
@@ -148,7 +148,7 @@ jobs:
     - name: Run php-cs-fixer
       uses: docker://oskarstark/php-cs-fixer-ga
 
-    - uses: stefanzweifel/git-auto-commit-action@v5
+    - uses: stefanzweifel/git-auto-commit-action@v6
       with:
         commit_message: Apply php-cs-fixer changes
 ```
@@ -170,7 +170,7 @@ You can use these outputs to trigger other Actions in your Workflow run based on
 ### Example
 
 ```yaml
-  - uses: stefanzweifel/git-auto-commit-action@v5
+  - uses: stefanzweifel/git-auto-commit-action@v6
     id: auto-commit-action #mandatory for the output to show up in ${{ steps }}
     with:
       commit_message: Apply php-cs-fixer changes
@@ -270,7 +270,7 @@ The example below can be used as a starting point to generate a multiline commit
     # Quick and dirty step to get rid of the temporary file holding the commit message
     - run: rm -rf commitmessage.txt
 
-    - uses: stefanzweifel/git-auto-commit-action@v5
+    - uses: stefanzweifel/git-auto-commit-action@v6
       id: commit
       with:
         commit_message: ${{ steps.commit_message_step.outputs.commit_message }}
@@ -294,7 +294,7 @@ As git-auto-commit by default does not use **your** username and email when crea
     git_commit_gpgsign: true
 
 - name: "Commit and push changes"
-  uses: stefanzweifel/git-auto-commit-action@v5
+  uses: stefanzweifel/git-auto-commit-action@v6
   with:
      commit_author: "${{ steps.import-gpg.outputs.name }} <${{ steps.import-gpg.outputs.email }}>"
      commit_user_name: ${{ steps.import-gpg.outputs.name }}
@@ -371,7 +371,7 @@ jobs:
     - name: Run php-cs-fixer
       uses: docker://oskarstark/php-cs-fixer-ga
 
-    - uses: stefanzweifel/git-auto-commit-action@v5
+    - uses: stefanzweifel/git-auto-commit-action@v6
 ```
 
 For more information about running Actions on forks, see [this announcement from GitHub](https://github.blog/2020-08-03-github-actions-improvements-for-fork-and-pull-request-workflows/).
@@ -406,7 +406,7 @@ The steps in your workflow might look like this:
     echo "message=$(git log -1 --pretty=%s)" >> $GITHUB_OUTPUT
     echo "author=$(git log -1 --pretty=\"%an <%ae>\")" >> $GITHUB_OUTPUT
 
-- uses: stefanzweifel/git-auto-commit-action@v5
+- uses: stefanzweifel/git-auto-commit-action@v6
   with:
     commit_author: ${{ steps.last-commit.outputs.author }}
     commit_message: ${{ steps.last-commit.outputs.message }}
@@ -462,7 +462,7 @@ You can learn more about Personal Access Token in the [GitHub documentation](htt
 If you go the "force pushes" route, you have to enable force pushes to a protected branch (see [documentation](https://help.github.com/en/github/administering-a-repository/enabling-force-pushes-to-a-protected-branch)) and update your Workflow to use force push like this.
 
 ```yaml
-    - uses: stefanzweifel/git-auto-commit-action@v5
+    - uses: stefanzweifel/git-auto-commit-action@v6
       with:
         commit_message: Apply php-cs-fixer changes
         push_options: --force
@@ -492,7 +492,7 @@ This is due to the fact, that the `*.md`-glob is expanded before sending it to `
 To fix this add `disable_globbing: true` to your Workflow.
 
 ```yaml
-- uses: stefanzweifel/git-auto-commit-action@v5
+- uses: stefanzweifel/git-auto-commit-action@v6
   with:
     file_pattern: '*.md'
     disable_globbing: true
@@ -520,7 +520,7 @@ yarn test
 
 We use [SemVer](http://semver.org/) for versioning. For the versions available, see the [tags on this repository](https://github.com/stefanzweifel/git-auto-commit-action/tags).
 
-We also provide major version tags to make it easier to always use the latest release of a major version. For example, you can use `stefanzweifel/git-auto-commit-action@v5` to always use the latest release of the current major version.
+We also provide major version tags to make it easier to always use the latest release of a major version. For example, you can use `stefanzweifel/git-auto-commit-action@v6` to always use the latest release of the current major version.
 (More information about this [here](https://help.github.com/en/actions/building-actions/about-actions#versioning-your-action).)
 
 ## Credits