diff --git a/zh_TW/quickstart/container.md b/zh_TW/quickstart/container.md
new file mode 100644
index 0000000..b3f2237
--- /dev/null
+++ b/zh_TW/quickstart/container.md
@@ -0,0 +1,25 @@
+# Manage Containers
+
+Before starting, you need to install the Docker / Podman container engine.
+
+After the container engine is installed, you can go to the Panel's container management section to create containers (pgadmin4 is used as an example here).
+
+First, navigate to the Images tab to pull the required images. This may take several minutes to tens of minutes depending on your network environment.
+
+
+
+After the image is pulled, navigate to the Containers tab to start creating a container.
+
+
+
+Fill in the form according to the container's instructions. The pgadmin4 image used here needs to map port 80 and configure 2 default environment variables, with no need to map directories.
+
+After the container is created, you can click the refresh button in the upper right corner and the log button on the right side of the container to check if it has started properly.
+
+
+
+If the container fails to start, please make corrections according to the logs.
+
+If you have mapped external ports, you need to go to the firewall menu to allow the corresponding ports.
+
+
diff --git a/zh_TW/quickstart/disk.md b/zh_TW/quickstart/disk.md
new file mode 100644
index 0000000..2c4cbad
--- /dev/null
+++ b/zh_TW/quickstart/disk.md
@@ -0,0 +1,9 @@
+# Mount Partitions
+
+If your server has unmounted data disks, you can log in as `root` user before installation and run the following command to automatically mount them. Cross-directory migration is not supported after Panel installation.
+
+```shell
+curl -fsLm 10 -o auto_mount.sh https://dl.cdn.haozi.net/panel/auto_mount.sh && bash auto_mount.sh
+```
+
+You can also contact your server provider via ticket to request assistance with mounting partitions, or mount the partitions yourself before installing the Panel.
diff --git a/zh_TW/quickstart/install.md b/zh_TW/quickstart/install.md
new file mode 100644
index 0000000..d9bb5d8
--- /dev/null
+++ b/zh_TW/quickstart/install.md
@@ -0,0 +1,40 @@
+# Install Panel
+
+The Panel supports mainstream systems under `amd64` | `arm64` architectures. LNMP environment installation has been tested on all systems listed in the table below.
+
+It is recommended to use systems marked as **recommended**. Unless there are special circumstances, it is not recommended to use systems marked as **not recommended**.
+
+For systems not listed in the table below, you can try installing on your own, but no free technical support will be provided.
+
+| 系統 | 版本 | Note |
+| ------------------- | ------------------- | --------------- |
+| AlmaLinux | 9 | Recommended |
+| AlmaLinux | 8 | Not Recommended |
+| RockyLinux | 9 | Supported |
+| RockyLinux | 8 | Not Recommended |
+| CentOS Stream | 9 | Not Recommended |
+| CentOS Stream | 8 | Not Recommended |
+| Ubuntu | 24 | Recommended |
+| Ubuntu | 22 | Supported |
+| Debian | 12 | Recommended |
+| Debian | 11 | Supported |
+| OpenCloudOS | 9 | Supported |
+| TencentOS Server | 4 | Supported |
+| TencentOS Server | 3.1 | Not Recommended |
+| Alibaba Cloud Linux | 3.2 | Not Recommended |
+| Anolis | 8 | Not Recommended |
+| openEuler | 22 | Not Recommended |
+
+As system versions continue to update, we may also terminate support for some overly outdated systems to ensure the robustness of the Panel.
+
+## Start Installation
+
+> If you need to mount partitions, please complete before installing the Panel. Cross-directory migration is not supported after Panel installation.
+
+Log in to the server as `root` user and run the following command to install the Panel:
+
+```shell
+curl -fsLm 10 -o install.sh https://dl.cdn.haozi.net/panel/install.sh && bash install.sh
+```
+
+Installation is usually completed within 2 minutes. Do not close the terminal during the installation process.
diff --git a/zh_TW/quickstart/panel.md b/zh_TW/quickstart/panel.md
new file mode 100644
index 0000000..94c8262
--- /dev/null
+++ b/zh_TW/quickstart/panel.md
@@ -0,0 +1,27 @@
+# Manage Panel
+
+Do not stop or restart the Panel while tasks are still running, as this may cause issues.
+
+- Start Panel: `systemctl start panel`
+- Stop Panel: `systemctl stop panel`
+- Restart Panel: `systemctl restart panel`
+
+## Panel Command Line
+
+```bash
+panel-cli
+```
+
+Follow the prompts to complete the necessary commands for operation.
+
+## Uninstall Panel
+
+It is primarily recommended to back up data and reinstall the system, as this ensures a clean system.
+
+If you are unable to reinstall the system, please log in to the server as `root` user and execute the following command to uninstall the Panel:
+
+```shell
+curl -fsLm 10 -o uninstall.sh https://dl.cdn.haozi.net/panel/uninstall.sh && bash uninstall.sh
+```
+
+Before uninstalling the Panel, be sure to back up all data and uninstall all Panel applications in advance. Data will be **unrecoverable** after uninstallation!
diff --git a/zh_TW/support.md b/zh_TW/support.md
new file mode 100644
index 0000000..3b9baa4
--- /dev/null
+++ b/zh_TW/support.md
@@ -0,0 +1,37 @@
+---
+sidebar: false
+prev: false
+next: false
+---
+
+# Support
+
+## Free Forum Service
+
+We provide a free forum service where you can ask questions, discuss, and share issues related to using the Panel.
+
+- [Moe Tom](https://tom.moe)
+
+## Paid Remote Service
+
+Website errors, slow speed, malware infections? High server resource usage, configuration optimization, intrusion tracing? We provide all these services in one place.
+
+### Remote Service Price List
+
+Remote service refers to our assistance in solving your problems through remote support.
+
+| Service Name | 描述 | Price |
+| -------------- | ----------------------------------------------------------------------- | -------- |
+| Single Service | Limited to one service session, service ends when the issue is resolved | From ¥50 |
+
+### Service Process
+
+1. Contact us in advance and explain the issue
+2. We evaluate the problem, confirm whether it can be resolved, and provide an estimated price
+3. After you confirm the price, pay 50% upfront, and the service begins
+4. After service completion, you confirm everything is in order and pay the remaining amount
+
+## Contact Us
+
+- [WeChat Work](https://work.weixin.qq.com/kfid/kfc20ea8e38b5a4e73a)
+- [QQ 826896000](https://wpa.qq.com/msgrd?v=3&uin=826896000&site=qq&menu=yes)
diff --git a/zh_TW/version-[version].md b/zh_TW/version-[version].md
new file mode 100644
index 0000000..f92cabf
--- /dev/null
+++ b/zh_TW/version-[version].md
@@ -0,0 +1,8 @@
+# v{{ $params.version }}
+
+- Version Type: {{ $params.type == 'stable' ? 'Stable' : 'Beta' }}
+- Release Time: {{ $params.time }}
+
+## Updates log
+
+
+ 
+ 
+ 
+